Cryogenic
storage:
Because of their wide thermal operating range,
Heat sealed High performance films like FEP are
being used to store cord blood and tissue
samples. Overwrap bags made from Teflon ® FEP
provide a secondary level of containment for
precious samples.
|
Lay Flat Bags
No lay flat bag is too small, too large or
complicated for Ingeniven to create for you - FEP bags, PFA bags, modified PTFE bags.
|
Pillow Dome
Bioshelter (Bioshelters are solar buildings that
create a constant growing environment in a
temperate climate, heated by solar energy)
|
Glove bags
For
handling hazardous materials
|
|
Ingeniven can help
you by designing and fabricating custom heat
sealed configurations in a variety of plastic
films. From simple small lay flat bags to large
complex multi layer configurations, the
engineers at Ingeniven have been helping people
design unique heat sealed structures, enclosures
and bags for 28 years.
Understanding the variables that go into making
a perfect heat seal are the key to successful
design of any heat sealed product. Years of
experience go into every heat sealed product
that leaves Ingeniven.
All of Ingeneiven thermal impulse and constant
heat welds are made on equipment that was
designed specifically for high temperature film
welding. We measure the strength of welds using
specifications that were developed for NASA. We
can validate and certify seal strength on all of
your heat sealed products.
Heat Sealed High performance films have provided
solutions for: |
Environmental
Sampling
Gas and soil sample bags
Groundwater sampling devices
Specimen collection bags and containers
Bucket and pail liners
Climate Change simulation chambers:
As Global warming threatens our planet, more and
more research facilities devoted to the study of
climate change use simulation chambers
(Sometimes known as smog chambers) heat sealed
from FEP and PFA films to create a controlled
environment in which to perform research.
Engineers at Ingeniven designed the very first
smog chamber used by Carneige Mellon University
almost 20 years ago. Since that time they have
helped dozens of researches from all over the
globe design and produce simulation chambers
ranging from small desktop enclosures to huge
chambers that are a “walk in” laboratory.
For more information on Climate change
simulation chambers (smog chamber)
click here
Escape hoods
Escape hoods heat sealed from high performance
films are used by the military, first
responders, pilots, passengers, and homeowners
alike when evacuating a hazardous environment
means the difference between life and death….
we have over 20 years of experience in sealing
high performance films for escape hoods.
BioPharmaceutical Processing:
Custom Bags fabricated from inert films replace
large, bulky stainless bioreactors. Downtime and
cross contamination between batches are reduced,
because of their low cost, numerous systems can
be set up simultaneously.
Chemical
processing:
Many two part epoxies and other chemistries are
stored, mixed, and cured in fluoropolymer bags,
proving clean, easy, and cost effective
solutions for the end users.
High performance materials are used to protect
EPDM rubber in the chlor alkali marketplace,
extending the lifespan of gaskets and reducing
downtime.
Capabilities:
Materials: Most thermoplastic materials from
.001” thru .020”
Seal widths: From: 1/8” to 3/8”
Seal Lengths: Unlimited
Unique seal shapes can be produced. Please
send us your project details for evaluation. We
will be delighted to help you.
|
|
|
|
